Outages, Utilities & EV

Whole House Generator Cost in 2026: Prices by Size, Installation Steps and What Drives the Bill

A whole home generator is a big purchase. Here is what one really costs installed, where the money goes and how the installation works from quote to first test run.

Clement JamesBy Clement James, Tervano Electric · Twin Falls, Idaho · November 2026

Illustration of a house connected to a standby generator with a price tag showing whole house generator cost

A whole house generator typically costs $8,000 to $16,000 installed in 2026 for a 14 to 26 kW standby unit. That covers the generator, an automatic transfer switch, the concrete or composite pad, gas and electrical connections, the permit and startup. Smaller critical-load systems start around $4,500. Large liquid-cooled units for big homes can pass $20,000. Fuel type, distance to the panel and panel upgrades move the price the most.

Safety first. Never connect a generator to your home without a transfer switch or listed interlock. Back-feeding through an outlet can electrocute utility line workers and neighbors. Run generators outdoors only, well away from windows and doors.

The power goes out on a winter night. The furnace stops, the well pump stops and the freezer starts warming. Your neighbor's lights come back on ten seconds later. Their whole house generator started on its own. You start wondering what one of those really costs.

This guide breaks down whole house generator cost by size, explains every line on a typical quote and walks through the installation. To see how an electrician handles the job start to finish, visit our generator installation service page.

How much does a whole house generator cost?

Most homeowners pay $8,000 to $16,000 for a whole house generator installed. The generator itself is often less than half the bill. Installation, the transfer switch and fuel work make up the rest.

System sizeWhat it powersTypical installed cost
Portable generator + manual transfer switchA few chosen circuits$500 to $1,500 electrical work, generator extra
7 to 12 kW standbyCritical loads: furnace, fridge, well pump, lights$4,500 to $8,000
14 to 18 kW standbyMost of a small or mid-size home$7,000 to $12,000
20 to 26 kW standbyWhole home, including central air in many homes$8,000 to $16,000
30 to 60 kW liquid-cooledLarge homes, all-electric homes, small farms$18,000 to $35,000 or more

How we built this table: ranges combine our own installed-cost ranges with published national cost guides such as Angi's generator cost guide. Prices vary by region, brand and site conditions. Always get a written quote for your home.

Generator unit vs installation cost

A popular 22 kW air-cooled unit often sells for about $5,000 to $6,500 on its own. Installation commonly adds a similar amount or more. That is why the installed price, not the shelf price, is the number that matters.

What is included in a whole house generator installation cost?

A complete quote includes the equipment, the transfer switch, the site work, the fuel line, the electrical connection, the permit and startup.

Cost itemTypical rangeNotes
Generator unit (14 to 26 kW)$4,000 to $7,500Brand, size and enclosure matter
Automatic transfer switch (ATS)$1,000 to $2,500Whole-house or load-managed
Pad and placement$200 to $800Composite pad or concrete base
Electrical installation$1,500 to $4,000Wiring, conduit, ATS hookup
Gas or propane line$500 to $3,000Depends on distance and meter size
Permits and inspections$100 to $600Electrical and often gas or building
Panel or service upgrade (if needed)$1,500 to $5,000Only when the panel cannot accept the ATS

How we built this table: each line is a typical range for a residential standby install, based on our project experience and published guides. Not every home needs every line, and some sites cost more.

What makes a whole house generator cost more?

Size, fuel, distance and your electrical panel drive most of the price differences.

  • Generator size. Each step up in kW adds cost. Oversizing wastes money, undersizing leaves loads dark.
  • Fuel type. Natural gas is often cheapest to connect. Propane needs a tank and regulator. Diesel suits large or rural sites.
  • Distance. Long runs from the generator to the panel and gas meter mean more wire, conduit and pipe.
  • Gas meter capacity. Some meters are too small for a large generator and need a utility upgrade.
  • Panel condition. An old, full or unsafe panel may need replacing first. See our panel upgrade page.
  • Transfer switch type. A whole-house ATS costs more than a smaller switch for chosen circuits.
  • Local rules. Setback distances, noise limits and permit fees vary by city and county.

What size whole house generator do you need?

Most average homes need 14 to 22 kW. Homes with central air, electric heat or a well pump often need 20 to 26 kW. All-electric homes may need more.

  1. List the loads you must run: furnace or heat pump, AC, well pump, fridge, water heater, range.
  2. Add their running watts.
  3. Add the starting surge of the largest motor, such as the AC or well pump.
  4. Choose a generator that covers that total with some margin.
  5. Consider load management to run a smaller generator safely.

Our detailed generator sizing guide walks through the math with examples. If the panel itself is the limit, see our electrical panel size guide. If you rely on a well, read why a well pump stops working, since pump starting current affects sizing.

Natural gas vs propane vs diesel: which fuel is best?

Natural gas is the most convenient where it is available. Propane works anywhere with a tank. Diesel fits large loads and remote sites, such as the farms our agricultural electrician service works on.

FuelBest forProsCons
Natural gasCity and suburban homesUnlimited supply, no refuelingNot available everywhere, slightly less output
Propane (LP)Rural homes without gasStores for years, clean burningTank cost, refills during long outages
DieselLarge homes, farms, commercialHigh output, efficientFuel storage, maintenance, noise

Do you need an automatic transfer switch?

Yes, for a permanent standby generator. The automatic transfer switch disconnects your home from the utility and connects the generator within seconds of an outage. It also keeps power from flowing back onto utility lines.

Whole-house vs load-managed transfer switch

A whole-house switch connects every circuit. A load-managed switch sheds big loads, such as AC or an EV charger, when the generator nears its limit. Load management can let you buy a smaller generator.

What about a generator interlock?

An interlock kit is a low-cost option for a portable generator. Compare every option in our generator transfer switch guide. It mechanically stops the main breaker and generator breaker from both being on. It must be listed for your panel and installed with a permit.

How is a whole house generator installed?

Most installations take one to three days on site, plus time for permits and gas utility work.

  1. Site visit and load calculation. The electrician checks your panel, loads, gas meter and placement.
  2. Quote and permits. The contractor pulls the electrical permit, and gas or building permits where required. See how electrical permits work.
  3. Pad and placement. The generator sits on a level pad at the required distance from windows, doors and property lines.
  4. Transfer switch. The ATS is mounted near the main panel and wired in.
  5. Electrical connection. Conductors run in conduit from the generator to the ATS.
  6. Fuel line. A licensed installer runs and tests the gas or propane line.
  7. Inspection. The inspector checks the work before final startup.
  8. Startup and test. The installer programs the weekly exercise cycle and simulates an outage.

Planning a whole house generator?

In Twin Falls or the Magic Valley? Tervano Electric sizes, permits and installs standby generators and transfer switches for homes and farms. Request an estimate or call (208) 719-5016.

Is a whole house generator worth the cost?

For homes with frequent or long outages, a well pump, medical equipment or a home office, a whole house generator is usually worth it. For homes with rare, short outages, a smaller system may be enough.

  • Worth it if outages last hours or days, you rely on a well or sump pump, or someone needs powered medical devices.
  • Worth it if frozen pipes or spoiled food would cost more than the system over time.
  • Consider a smaller system if outages are rare and short.
  • Consider a portable generator and interlock if budget is the main limit.

Preparing for winter storms? Our winter power outage checklist covers what to do before and during an outage.

What does a whole house generator cost to run and maintain?

Expect fuel during outages, a small amount for weekly exercise runs and yearly maintenance. Most owners budget $200 to $500 a year for service.

A whole-home surge protector also helps protect electronics when power switches between utility and generator.

  • Annual service: oil, filters, spark plugs and battery check
  • Battery replacement every few years
  • Fuel use rises with load, so large units burn more per hour
  • Weekly self-test cycles use a little fuel and should run on schedule

What mistakes should you avoid?

  • Buying on unit price alone. Compare full installed quotes.
  • Undersizing for motor starts. AC and well pumps need surge capacity.
  • Ignoring the gas meter. A small meter can starve a large generator.
  • Skipping permits. Unpermitted installs cause insurance and resale problems. Hire a licensed electrician.
  • Placing it too close to the house. Exhaust needs clearance from windows, doors and vents.
  • Skipping maintenance. A generator that fails its first real outage is the worst outcome.

Whole house generator cost: frequently asked questions

How much does a whole house generator cost installed?

Most whole house generators cost $8,000 to $16,000 installed for a 14 to 26 kW standby unit. Smaller critical-load systems start around $4,500, and large liquid-cooled systems can exceed $20,000.

How much does it cost to install a Generac generator?

Installation for a Generac home standby generator commonly adds $3,000 to $8,000 on top of the unit price. The final cost depends on size, fuel line distance, transfer switch type and permits.

What size generator do I need to run my whole house?

Most average homes need 14 to 22 kW. Homes with central air, electric heat or a well pump often need 20 to 26 kW. A load calculation gives the exact size.

How long does a whole house generator last?

Many air-cooled standby generators last 10 to 20 years, or roughly 1,000 to 3,000 run hours, with yearly maintenance. Liquid-cooled units usually last longer.

Does a whole house generator add home value?

Many buyers value backup power, especially in areas with frequent outages. It can help a home sell, but you may not recover the full cost in the sale price.

Can I install a whole house generator myself?

No. The electrical, gas and permit work should be done by licensed professionals. Mistakes can cause fires, gas leaks or back-feed that endangers utility workers.

How long does installation take?

Most installs take one to three days on site. Permits, inspections and gas utility work can add one to several weeks before the system is running.

What should you do next about a whole house generator?

A whole house generator usually costs $8,000 to $16,000 installed, and most of the price comes from the install, not the box. Remember the dark house and the neighbor whose lights came back on in seconds. With the right size, fuel and transfer switch, that can be your home at the next outage.

Here is the order to work through:

  1. List the loads you must keep running. Heat, water, food and medical needs first.
  2. Get a load calculation. It sets the generator and transfer switch size.
  3. Compare full installed quotes. Include permits, fuel line and any panel work.
  4. Plan maintenance. Budget for yearly service from day one.

Do you already have a standby generator, or are you still weighing the cost? Share your questions in the comments. If you are in Twin Falls or the Magic Valley, contact Tervano Electric for a written quote.

How long did your longest power outage last, and what did it cost you?

Sources: Angi: home generator cost guide · Ready.gov: power outages · NFPA 70: National Electrical Code.

Need an Electrician in Twin Falls?

Licensed, insured, permitted. Written estimate before work starts.

📞 (208) 719-5016Get an Estimate
Call nowGet an estimate